TG BUFFER-manufacture,factory,supplier from China

(Total 24 Products for TG BUFFER)
TriacetateGlyceryl triacetate is an organic compound with a C9H14O6 molecular formula, colorless and odorless oily liquid, miscible with ethanol, ether, chloroform and benzene, slightly soluble in water and carbon disulfide. Used as cigarette filter binder and fragrance fixative, solvent, toughening agent. And can be used in cosmetics, casting, medicine, dyes and other industries. This product is non-toxic and non-irritating.Production methodIt is obtained by glycerol and acetate. After preheating glycerol to 50-60 ° C, acetic acid is added; Benzene and sulfuric acid.
  Contact Now
1. Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver. Put the fresh intestinal mucosa into the reaction pot, add sodium chloride at 3%, and adjust the pH to 9.5 with 40% sodium hydroxide. Gradually heat up to 60-65 ° C within half an hour, continue to hold heat and stir for 2h, then heat up to 95 ° C, maintain for 10min, cool to below 50 ° C and filter.
  Contact Now
Pharmacology and toxicologyWhen the plasma concentration exceeds 5 μg·mL-1, convulsions can occur, and at low doses, it can promote the outflow of K+ in myocardial cells, reduce the auto-discipline of the myocardium, and have anti-ventricular arrhythmic effect; At therapeutic doses, there is no significant effect on the electrical activity of cardiomyocytes, atrioventricular conduction and contraction of myocardium; Further increase in blood concentration can cause slowing of cardiac conduction velocity, atrioventricular block, inhibition of myocardial contractility and decrease of cardiac out
  Contact Now
Anilidine, additionally acknowledged as aminobenzene, is an natural compound, chemical components C6H7N, is a colorless oily liquid, heated to 370 °C decomposition, barely soluble in water, soluble in ethanol, ether and different natural solvents.Aniline is one of the most vital amines. It is in general used in the manufacture of dyes, drugs, resins, and can additionally be used as rubber vulcanization accelerators. It itself can additionally be used as a black dye.
  Contact Now
1.3-Butanediol is an natural compound with a molecular formulation of C4H10O2, by and large used in the instruction of polyester resin, polyurethane resin, plasticizer, etc., and additionally used as a humidifier and softener for textiles, paper and tobacco.Chinese Name: 1,3-ButanediolChinese aliases: 1,3-Dihydroxybutane; (±)-1,3-ButanediolEnglish alias: Butanediol; butane-1,3-diol; (3S)-butane-1,3-diol; (3R)-butane-1,3-diolCAS:107-88-0EINECS:203-529-7FEMA registration number: 2842Physical and chemical indicatorsAppearance: colorless, viscous l
  Contact Now
Cyclohexanone is an natural compound with the components C6H10O , a saturated cyclic ketone with carbonyl carbon atoms blanketed in a six-membered ring. Colorless obvious liquid with earthy smell, with mint scent when containing hint quantities of phenol. Impurities are mild yellow, which enhance shade with the formation of impurities throughout storage time, and are water-white to gray-yellow, with a sturdy pungent odor.
  Contact Now
Storage Conditions/Storage methods:Seal away from light and store in a cool place.Stability related:Other information:1. Properties: White or white powder. Almost odorless, tasteless and hygroscopic.2. Solubility: soluble in water and salt water, insoluble in ethanol, acetone, benzene, chloroform and ether. The pH of 1% aqueous solution is 6.0~7.5.Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver.
  Contact Now
Molecular shape dataMolar refractive index: 41.72Molar extent (cm3/mol): 128.4Isotonic unique quantity (90.2K): 338.5Surface tension (dyne/cm): 48.2Polarizability (10-24cm3): 16.54Computational chemical dataHydrophobic parameters calculation reference price (XlogP): 1.7Number of hydrogen bonded donors: 1Number of hydrogen bond receptors: threeNumber of rotatable chemical bonds: 1Number of tautomers:Topological molecular polar floor place (TPSA): 54.4Number of heavy atoms: elevenSurface charge: zeroComplexity:
  Contact Now
Character description: colorless obvious liquid. Melting factor -90.2C, boiling factor 117.7 °C, relative density 0.8098 (20/4C), refractive index 1.3993, flash factor 35.35.5 °C, spontaneous ignition factor 365 °C. The solubility in water at 20 °C is 7.7% (mass), and the solubility of water in n-butanol is 20.1% (mass). Miscible with ethanol, ethyl and different natural solvents. Vapor varieties an explosive combination with air, with an explosion restrict of 1.45-11.25 (volume).
  Contact Now
Guanidine acetate glycine and its derivatives, useful accelerator, does no longer include any unlawful drugs, no poisonous substances, protected to use besides discontinuation period.Appearance shape: white or yellowish powder, the provider will purpose the look colour to change, however does no longer have an effect on the impact of the product.Mechanism of motion Guanidinoacetic acid is a precursor to creatine.
  Contact Now
Chinese Name: Thiopidine trioxide Chinese synonyms: compounds of thiopidine trioxide; sulfur trioxide-pyridine complex; Pyridine sulfur trioxide; Thiopidine trioxide; Thiopidine trioxide complex; Synthesis of thiophorine trioxide; Sulfur trioxide yridine complex; Sulfurtrioxypyridine complex [2]English name: Pyridine sulfur trioxide English synonyms: Pyridine, compd.withsulfurtrioxide (1:1); Salfurtrioxidepyri-dinecomplex; Sulfurtrioxide,compd.withpyridine(1:1); (DIMETHYLAMINOMETHYL) STYRENE; VINYLBENZYLDIMETHYLAMINE; N,N-DIMETHYLVINYLBENZYLAMINE; POLY(4-VINYLPYRIDINE) SULFUR TRIOXID
  Contact Now
n-propanol, also known as 1-propanol, is an organic compound with a simple structural formula of CH3CH2CH2OH, a molecular formula of C3H8O, and a molecular weight of 60.10. At room temperature and pressure, n-propanol is a transparent colorless liquid with a strong musty smell similar to external alcohol, soluble in water, ethanol and ether. Generally, propionaldehyde is obtained by the synthesis of ethylene by carbonyl group, and then reduced to obtain.
  Contact Now
Trifluoroacetic acid, is an natural compound with the method C2HF3O2, on the whole used as a check reagent, solvent, catalyst and for natural synthesis.useMainly used as take a look at reagent, solvent, catalyst and for natural synthesis.First resource measuresSkin contact: Immediately cast off contaminated apparel and rinse with lots of strolling water for at least 15 minutes.
  Contact Now
Rare earth chitosamine chelated saltsRare earth chitosamine integration salts are special compounds that are composed of rare earth elements and chitosamine formed integrators. In chemistry, integration refers to the combination of one or more coordination groups (usually dominated by oxygen and ammonia atoms) with metal ions to form a stable complex.
  Contact Now
Phentermine (Phentermine), an organic compound with a molecular formula of C10H15N, is clinically used as an anorexia (diet drug) for the short-term treatment of moderate to severe obesity, and is listed as a Class II psychotropic drug controlBasic informationChinese name: phentermineEnglish name: phentermineMolecular Formula: C10H15NMolecular Weight: 149.233CAS number: 122-09-8EINECS number: 204-522-1PSA:26.02000LogP:2.66670Physical and chemical propertiesDensity: 0.938 g/cm3Boiling point: 206ºCFlash point: 93.1ºCRefractive index: 1.523Vapour pressure: 0.243mmHg at 25°C Molecular structu
  Contact Now
Boiling Point: 143-144 °C35 mm Hg(lit.)Density: 1.568 g/mL at 25 °C(lit.)Refractive index n20/D 1.572(lit.)Flash point > 230 °FSpecific gravity 1.568Sensitivity: Moisture sensitivityBRN4989077CAS DataBase Reference: 86393-34-2use2,4-Dichloro-5-fluorobenzoyl chloride is the main raw material for the preparation of third-generation quinolones such as trifluoroperidinol, trifluoroguabutenyl, pentafluridol and synthetic broad-spectrum antibiotics such as ciprofloxacin, and can also be used for pesticides, insecticides and ovicides, as well as the identification of plastics and resins.synthesisA
  Contact Now
Salicylic acid, a sort of natural acid, chemical method C7H6O3, is a white crystalline powder, barely soluble in bloodless water, effortlessly soluble in warm water, ethanol, ether and acetone, soluble in warm benzene, commonly used as medicine, spices, dyes, pesticides, rubber components and different essential uncooked substances of great chemicals.1.
  Contact Now
Phentermine (Phentermine), an organic compound with a molecular formula of C10H15N, is clinically used as an anorexia (diet drug) for the short-term treatment of moderate to severe obesity, and is listed as a Class II psychotropic drug controlBasic informationChinese name: phentermineEnglish name: phentermineMolecular structure dataMolar refractive index: 48.56Molar volume (cm3/mol): 158.9Isotonic specific volume (90.2K): 387.5Surface tension (dyne/cm): 35.3Polarizability (10-24cm3): 19.25 [5]Flash point: 93.1ºCRefractive index: 1.523Vapour pressure: 0.243mmHg at 25°C CAS number: 122-09-8
  Contact Now
Purpose 1used as pharmaceutical raw materials, health care products, intermediates, food additives, etcPurpose 2D-ribose is an important component of nucleic acid, the genetic material in living organisms, which occupies a pivotal position in the metabolism of nucleosides, proteins and fats, and has important physiological functions and broad application prospects. As a natural component of all cells in living organisms, D-ribose is closely related to the formation of adenylate and the regeneration of ATP, and is one of the most basic sources of energy for life metabolism.
  Contact Now
Basic informationChemical formula: C4H4O4Molecular Weight: 116.072CAS number: 110-17-8EINECS number: 203-743-0Physical and chemical propertiesPhysicalDensity: 1.63g/cm3Melting point: 298-300°CBoiling point: 355.5 °cFlash point: 183 °cRefractive index: 1.526(20°C)Appearance: white powder or colorless crystalsSolubility: soluble in ethanol, barely soluble in water and ether, insoluble in chloroform, carbon tetrachloride, benzeneChemical propertiesThe easiest unsaturated dicarboxylic acid.
  Contact Now
Alprazolam, is an organic compound with the formula C17H13ClN4, mainly used for the treatment of anxiety, depression, insomnia, can be used as an anti-panic drug, but also can relieve acute alcohol withdrawal symptoms, can also have a good therapeutic effect on drug-induced intractable hiccups.Pharmacological actionThis product is a new BDZ class drug, with similar pharmacological effects as diazepam, with anxiolytic, antidepressant, sedative, hypnotic, anticonvulsant and muscle relaxant effects.
  Contact Now
Chemical and physical properties of benzophenone hydrazoneDensity 1.1±0.1 g/cm3Boiling point 328.0±11.0 °C at 760 mmHgmelting point 95-98 °C(lit.)Molecular Formula C13H12N2Molecular weight 196.248Flash point 152.1±19.3 °CExact mass 196.100052PSA 38.38000LogP 2.79Appearance: White crystalline powderVapor pressure 0.0±0.7 mmHg at 25°CThe refractive index is 1.584Storage conditionsProtect from light, cool and dry place, sealed and storedstabilityStable at room temperature and pressure, white crystalline powder.MolecularMolecular property data:1. Molar refractive index: 62.322.
  Contact Now
Chemical propertiesFormaldehyde and resorcinol react under alkaline conditions to form orange-red compounds, which are colorimetric at a maximum absorption wavelength of 460nm to detect low traces of formaldehyde in textile and clothing.Since resorcinol can undergo enol and ketone form tautomerism, it can react with ammonia as follows:Ketone reaction of resorcinolUnder the action of ammonia, m-phenyltriamine is obtained by reaction in ketone, and the amine is hydrolyzed in the aqueous solution of acid to obtain resorcinol.
  Contact Now
Appearance: yellow or orange-yellow crystalline powder; Odorless and tasteless; It is easy to decompose when exposed to lightMelting point 49-51 °cBoiling Point: 715.32°C (rough estimate)Density0.9145 (rough estimate)refractive index: 1.4760 (estimate)Storage conditions: −20°CSolubility is easily soluble in chloroform.Morphological neatColor: light orange to dark orangeSensitive to photosMerck9843BRN1900141Stable but may be sensitive to light or heat. Store at -20°C protected from light.
  Contact Now
Relate News
Medicine intermediate refers to a compound generated as an intermediate step in the process of synthetic drugs. It has high purity and activity, which can synthesize target drugs through further chemical reactions. Medicine intermediates are widely used in the pharmaceutical industry, covering multiple fields. The classification of pharmaceutical intermediates and its application areas will be introduced below.1. Carboxylic acid intermediate:The intermediate of the carboxylic acid refers to the compound of the carboxylic acid group, and the common ones are benzoic acid and propylic acid.
I. Overview of chemical and pharmaceutical intermediatesChemical pharmaceutical intermediates are a very important part of the pharmaceutical industry, referring to raw materials or semi-finished products in the pharmaceutical industry. These substances undergo a series of chemical reactions to eventually form pharmaceutical products. These chemicals usually exist in liquid or solid form and belong to various types of organic compounds such as acids, alcohols, carboxylic acids, phenols, cork and so on.
April 23, 2020. Customized in the middle of Shandong Pharmaceutical. The so -called Shandong pharmaceutical intermediate is actually some chemical raw materials or chemical products for drug synthesis process. This kind of chemical product does not require the production license of drugs. It can be produced in ordinary chemical plants. As long as it reaches some levels, it can be used for the synthesis of drugs.There are more than 2,000 raw materials and intermediates that need to be matched with chemicals each year, with more than 2.5 million tons.
May 13, 2020. Pharmaceutical intermediate body fluorine customized. Pharmaceutical fluorine: colorless liquid. The melting point -42 ℃. Boiling point 85 ° C. Refractive index (ND20) 1.4650. Relators (D420) 1.024. Insuvenate in water and mixes with ethanol, ether, acetone, and benzene. Apineine reacts through Schiemann (G. Schiemann).Ah. After the aniline was descended to -8 ° C after 31%hydrochloride, and the sodium nitrite solution was nitroded.
Intermediate production of chemical medicine is a work involving a large number of chemicals. If it is not managed and controlled correctly, it may bring serious risks and pollution to the environment. In order to reduce environmental risks in the production of chemical medicine, we need to improve and control from the following aspects.First, establish a scientific and standardized production process. The production of chemical medicine needs to go through multiple steps and reactions. Each step needs to carefully evaluate and formulate corresponding operating procedures.
Shandong is one of the important pharmaceutical production bases in the country, and the production production is relatively concentrated. The treatment of Shandong Pharmaceutical Intermediate waste is essential for protecting the environment, human health, and sustainable enterprise. This article will discuss how to properly handle waste in the production of Shandong pharmaceutical intermediates.First, reasonable classification and storage wasteReasonable classification and storage waste are the first step in waste treatment.