Lidocaine-manufacture,factory,supplier from China

(Total 24 Products for Lidocaine)
Pharmacology and toxicologyThis product is an amide local anesthetic. After blood absorption or intravenous administration, it has obvious excitation and inhibition biphasic effect on the central nervous system, and there can be no precursor excitement, when the blood concentration is low, analgesia and drowsiness, and the pain threshold is increased; With the increase of dose, the effect or toxicity increases, and there is an anticonvulsant effect at the concentration of subtoxic blood drugs; When the blood concentration exceeds 5 mg·mL-1, convulsions can occur.
  Contact Now
Pharmacology and toxicologyWhen the plasma concentration exceeds 5 μg·mL-1, convulsions can occur, and at low doses, it can promote the outflow of K+ in myocardial cells, reduce the auto-discipline of the myocardium, and have anti-ventricular arrhythmic effect; At therapeutic doses, there is no significant effect on the electrical activity of cardiomyocytes, atrioventricular conduction and contraction of myocardium; Further increase in blood concentration can cause slowing of cardiac conduction velocity, atrioventricular block, inhibition of myocardial contractility and decrease of cardiac out
  Contact Now
Phentermine (Phentermine), an organic compound with a molecular formula of C10H15N, is clinically used as an anorexia (diet drug) for the short-term treatment of moderate to severe obesity, and is listed as a Class II psychotropic drug controlBasic informationChinese name: phentermineEnglish name: phentermineMolecular Formula: C10H15NMolecular Weight: 149.233CAS number: 122-09-8EINECS number: 204-522-1PSA:26.02000LogP:2.66670Physical and chemical propertiesDensity: 0.938 g/cm3Boiling point: 206ºCFlash point: 93.1ºCRefractive index: 1.523Vapour pressure: 0.243mmHg at 25°C Molecular structu
  Contact Now
Basic informationChemical formula: C4H4O4Molecular Weight: 116.072CAS number: 110-17-8EINECS number: 203-743-0Physical and chemical propertiesPhysicalDensity: 1.63g/cm3Melting point: 298-300°CBoiling point: 355.5 °cFlash point: 183 °cRefractive index: 1.526(20°C)Appearance: white powder or colorless crystalsSolubility: soluble in ethanol, barely soluble in water and ether, insoluble in chloroform, carbon tetrachloride, benzeneChemical propertiesThe easiest unsaturated dicarboxylic acid.
  Contact Now
n-propanol, additionally acknowledged as 1-propanol, is an natural compound with a easy structural formulation of CH3CH2CH2OH, a molecular formulation of C3H8O, and a molecular weight of 60.10. At room temperature and pressure, n-propanol is a obvious colorless liquid with a sturdy musty scent comparable to exterior alcohol, soluble in water, ethanol and ether.
  Contact Now
Alprazolam, is an organic compound with the formula C17H13ClN4, mainly used for the treatment of anxiety, depression, insomnia, can be used as an anti-panic drug, but also can relieve acute alcohol withdrawal symptoms, can also have a good therapeutic effect on drug-induced intractable hiccups.Pharmacological actionThis product is a new BDZ class drug, with similar pharmacological effects as diazepam, with anxiolytic, antidepressant, sedative, hypnotic, anticonvulsant and muscle relaxant effects.
  Contact Now
Quality standardsOff-white to light yellow crystalline appearanceContent 299% (HPLC)Melting point 216-220°C(s2C)Moisture S21.5%Ignition residue S0.2%The ethanol water dissolution test (thousand products) is qualifiedUses: used in pharmaceuticals, biological reagents, dyes, can also be used to synthesize 5,7-dimeryl flavonoids.As a medicine, resorcinol directly acts on the smooth muscle of the gastrointestinal tract and genitourinary tract, and is a prophilic non-atropine non-sinosynergine pure smooth muscle antispasmodic drug Compared with other smooth muscle spasmodics, resorcinol is characte
  Contact Now
Appearance: Colorless liquid. The boiling point is 189 °C, the relative density is 1.073 (25/4 °C), the refractive index is 1.4494, and the flash point is 76 °C. Soluble in organic solvents, insoluble in water.Melting point -52 °cBoiling Point: 189 °C(lit.)Density 1.075 g/mL at 20 °CVapor pressure 4.2hPa at 25°CRefractive index n20/D 1.449(lit.)Flash point 169 °FStorage conditions RefrigeratorMorphological liquidThe color is transparentWater solubility: 0.5-1.0 g/100 mL at 20 ºCBRN2506Stability is unstable. Sensitivity to light. MEHQ of about 100 ppm can be used as a stabilizer.
  Contact Now
An organic compound, colorless transparent liquid with a relative density of 0.971, soluble in organic solvents such as alcohols, ethers and ethyl acetate.
  Contact Now
TriacetateGlyceryl triacetate is an organic compound with a C9H14O6 molecular formula, colorless and odorless oily liquid, miscible with ethanol, ether, chloroform and benzene, slightly soluble in water and carbon disulfide. Used as cigarette filter binder and fragrance fixative, solvent, toughening agent. And can be used in cosmetics, casting, medicine, dyes and other industries.
  Contact Now
Anilidine, additionally acknowledged as aminobenzene, is an natural compound, chemical components C6H7N, is a colorless oily liquid, heated to 370 °C decomposition, barely soluble in water, soluble in ethanol, ether and different natural solvents.Aniline is one of the most vital amines. It is in general used in the manufacture of dyes, drugs, resins, and can additionally be used as rubber vulcanization accelerators. It itself can additionally be used as a black dye.
  Contact Now
Character description: colorless obvious liquid. Melting factor -90.2C, boiling factor 117.7 °C, relative density 0.8098 (20/4C), refractive index 1.3993, flash factor 35.35.5 °C, spontaneous ignition factor 365 °C. The solubility in water at 20 °C is 7.7% (mass), and the solubility of water in n-butanol is 20.1% (mass). Miscible with ethanol, ethyl and different natural solvents. Vapor varieties an explosive combination with air, with an explosion restrict of 1.45-11.25 (volume).
  Contact Now
Uroptrazine, also known as hexamethylenetetramine, has the formula C6H12N4 and is an organic compound.It is listed in the "List of Hazardous Chemicals Prone to Explosion" [1] and controlled in accordance with the "Measures for the Safety Management of Hazardous Chemicals that Can Be Made into Explosives"Toxicological dataAcute toxicity: LD50: 9200mg/kg (rat venous); 569mg/kg (mouse by mouth).[3] Use of methenamineUsed as a curing agent for resins and plastics, catalyst and foaming agent for amino plastics, accelerator for rubber vulcanization (accelerator H), anti-shri
  Contact Now
Chinese name nitrobenzeneEnglish name nitrobenzeneEnglish aliases more Nitrobenzene physicochemical propertiesDensity 1.205boiling point 210-211 °C(lit.)melting point 5-6 °C(lit.)Molecular Formula C6H5NO2Molecular Weight: 123.10900Flash point 190 °FExact mass 123.03200PSA 45.82000LogP 2.11800Appearance traits yellow liquidVapor density 4.2 (vs air)Vapour pressure 0.15 mm Hg ( 20 °C)refractive index n20/D 1.551(lit.)Storage conditions Storage precautions Store in a cool, ventilated warehouse. Keep away from tinder, heat sources. Keep the container tightly sealed.
  Contact Now
Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylEnglish aliases more Ethyl trifluoroacetoacetate physicochemical propertiesDensity 1.3±0.1 g/cm3boiling point 129.5±0.0 °C at 760 mmHgMelting point -39 °CMolecular Formula C6H7F3O3Molecular weight 184.113flash point 28.9±0.0 °CExact Mass 184.034729Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylEnglish alias  Ethyl trifluo
  Contact Now
Purpose 1It can be widely used in food, cosmetics, dietary supplements and other industries.Purpose 2Coenzymes. It is also an important antioxidant and immune booster. It is used for the adjuvant treatment of congestive heart failure, arrhythmia, sinus tachycardia, premature contractions, hypertension and cancer, and for the comprehensive treatment of acute and chronic viral hepatitis and subacute liver necrosis. In addition, it is also used for primary and secondary hyperaldosteronism, cerebrovascular disorders and hemorrhagic shock.
  Contact Now
Chinese title nitrobenzeneEnglish title nitrobenzeneEnglish aliases moreNitrobenzene physicochemical propertiesDensity 1.205boiling factor 210-211 °C(lit.)melting factor 5-6 °C(lit.)Molecular Formula C6H5NO2Molecular Weight: 123.10900Flash factor one hundred ninety °FExact mass 123.03200PSA 45.82000LogP 2.11800Appearance qualities yellow liquidVapor density 4.2 (vs air)Vapour stress 0.15 mm Hg ( 20 °C)refractive index n20/D 1.551(lit.)Storage conditionsStorage precautions Store in a cool, ventilated warehouse.
  Contact Now
Clonazepam , with the system C15H10ClN3O3 , is a benzodiazepine tranquilizer. Clinically, it is commonly used for: (1) therapy of epilepsy and convulsions, which are advantageous for all kinds of epilepsy, in particular for small seizures and myoclonic seizures. Intravenous therapy of popularity epilepticus. (2) Treatment of anxiousness and insomnia. (3) It is additionally high quality for choreas.
  Contact Now
Chinese name: citric acidChinese synonyms citric acid / citric acid; Citric anhydride; Citrate, anhydrous; Citric acid standards; Citric acid, ACS grade; Citric acid anhydrous, water-contained; Citric acid, anhydrous, ACS grade; Anhydrous citric acid standardEnglish name CitricacidEnglish synonyms BETZ6251; BETZ0623; BORICACID-POTASSIUMCHLORIDE-SODIUMHYDROXIDEBUFFER; BUFFERCONCENTRATE,PH7.00; BUFFERCONCENTRATE,PH8.00; BUFFERCONCENTRATE,PH9.00; BUFFERCONCENTRATE,PHOSPHATE/SODIUMHYDROXIDE; BUFFERCONCENTRATE,POTASSIUMCHLORIDE/SODIUMHYDROXIDECAS number 77-92-9The molecular formula is C6H8O7Molecul
  Contact Now
S-3-Hydroxytetrahydrofuran [1]English name: S-3-hydroxytetrahydrofuranChinese aliases: (S)-(+)3-hydroxy-tetrahydrofuran; (S)-(+)-3-Hydroxytetrahydrofuran; (S)-3-Hydroxytetrahydrofuran;S-3-Hydroxytetrahydrofuran; Afatinib intermediatesSYNONYMS: (S)-(+)-3-HYDROXY TETAHYDRO FURAN; (S)-(-)-3-HYDROXY TETRAHYDRO FURAN; S-(+)-3-HYDROXYTETRAHYDROFURAN; (S)-3-Hydroxyterthydrofurane; S-(+)-3-Hydroxytetrahydofuran; (2S)-2-Hydroxy-1,4-epoxybutane; (3S)-3-Hydroxytetrahydrofuran; (2S)-1,4-Epoxy-2-hydroxybutane; Afatinib intermediatesCAS:86087-23-2Molecular formula: C4H8O2Molecular weight: 88.11Assay: 98%Pro
  Contact Now
Salicylic acid, a sort of natural acid, chemical method C7H6O3, is a white crystalline powder, barely soluble in bloodless water, effortlessly soluble in warm water, ethanol, ether and acetone, soluble in warm benzene, commonly used as medicine, spices, dyes, pesticides, rubber components and different essential uncooked substances of great chemicals.1.
  Contact Now
Mercaptoacetic acid, is an natural acid, chemical components is C2H4O2S, is a colorless obvious liquid, has a sturdy disagreeable odor, miscible with water, miscible in ethanol, ether, soluble in everyday solvents, fast oxidation in air, in case of open flame, excessive warmness power combustion and launch of relatively poisonous hydrogen sulfide gas, broadly speaking used as blanket ending agent and bloodless scalding liquid uncooked materials.P
  Contact Now
Trifluoroacetic acid, is an organic compound with the formula C2HF3O2, mainly used as a test reagent, solvent, catalyst and for organic synthesis.useMainly used as test reagent, solvent, catalyst and for organic synthesis.First aid measuresSkin contact: Immediately remove contaminated clothing and rinse with plenty of running water for at least 15 minutes. Medical treatment.Eye contact: Immediately lift the eyelid and rinse thoroughly with plenty of running water or saline for at least 15 minutes. Medical treatment.Inhalation: Quickly leave the scene to fresh air. Keep your airways open.
  Contact Now
Formic acid is an organic substance with the chemical formula HCOOH and a molecular weight of 46.03 , commonly known as formic acid, which is the simplest carboxylic acid. A colorless liquid with a pungent odor. Formic acid is a weak electrolyte, but its aqueous solution is weakly acidic and corrosive, which can stimulate skin blistering. It is usually found in the secretions of bees, certain ants, and caterpillars. It is an organic chemical raw material, also used as a disinfectant and preservative.Formic acid was first developed by J. J. -L.
  Contact Now
Relate News
Medicine intermediate refers to a compound generated as an intermediate step in the process of synthetic drugs. It has high purity and activity, which can synthesize target drugs through further chemical reactions. Medicine intermediates are widely used in the pharmaceutical industry, covering multiple fields. The classification of pharmaceutical intermediates and its application areas will be introduced below.1. Carboxylic acid intermediate:The intermediate of the carboxylic acid refers to the compound of the carboxylic acid group, and the common ones are benzoic acid and propylic acid.
I. Overview of chemical and pharmaceutical intermediatesChemical pharmaceutical intermediates are a very important part of the pharmaceutical industry, referring to raw materials or semi-finished products in the pharmaceutical industry. These substances undergo a series of chemical reactions to eventually form pharmaceutical products. These chemicals usually exist in liquid or solid form and belong to various types of organic compounds such as acids, alcohols, carboxylic acids, phenols, cork and so on.
Intermediate production of chemical medicine is a work involving a large number of chemicals. If it is not managed and controlled correctly, it may bring serious risks and pollution to the environment. In order to reduce environmental risks in the production of chemical medicine, we need to improve and control from the following aspects.First, establish a scientific and standardized production process. The production of chemical medicine needs to go through multiple steps and reactions. Each step needs to carefully evaluate and formulate corresponding operating procedures.
April 23, 2020. Customized in the middle of Shandong Pharmaceutical. The so -called Shandong pharmaceutical intermediate is actually some chemical raw materials or chemical products for drug synthesis process. This kind of chemical product does not require the production license of drugs. It can be produced in ordinary chemical plants. As long as it reaches some levels, it can be used for the synthesis of drugs.There are more than 2,000 raw materials and intermediates that need to be matched with chemicals each year, with more than 2.5 million tons.
May 13, 2020. Pharmaceutical intermediate body fluorine customized. Pharmaceutical fluorine: colorless liquid. The melting point -42 ℃. Boiling point 85 ° C. Refractive index (ND20) 1.4650. Relators (D420) 1.024. Insuvenate in water and mixes with ethanol, ether, acetone, and benzene. Apineine reacts through Schiemann (G. Schiemann).Ah. After the aniline was descended to -8 ° C after 31%hydrochloride, and the sodium nitrite solution was nitroded.
Shandong is one of the important pharmaceutical production bases in the country, and the production production is relatively concentrated. The treatment of Shandong Pharmaceutical Intermediate waste is essential for protecting the environment, human health, and sustainable enterprise. This article will discuss how to properly handle waste in the production of Shandong pharmaceutical intermediates.First, reasonable classification and storage wasteReasonable classification and storage waste are the first step in waste treatment.