Hydrazinium Hydroxide-manufacture,factory,supplier from China

(Total 24 Products for Hydrazinium Hydroxide)
Purpose 1Salicylic acid and acetic acid. Slightly soluble in water, soluble in ethanol, ether, chloroform, also soluble in hydroxide alkali solution or carbonic acid solution, and decompose at the same time. Commonly used antipyretic analgesics.
  Contact Now
1. Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver. Put the fresh intestinal mucosa into the reaction pot, add sodium chloride at 3%, and adjust the pH to 9.5 with 40% sodium hydroxide. Gradually heat up to 60-65 ° C within half an hour, continue to hold heat and stir for 2h, then heat up to 95 ° C, maintain for 10min, cool to below 50 ° C and filter.
  Contact Now
Sulfadiazine is an natural compound with a molecular formulation of C10H10N4O2S, white or off-white crystals or powders, odorless, tasteless, and step by step darkened when uncovered to light. Almost insoluble in water, soluble in boiling water (1:60), barely soluble in ethanol and acetone, insoluble in chloroform and ether, soluble in dilute hydrochloric acid, sodium hydroxide answer or ammonia solution. Melting factor 252~256 °C (simultaneous decomposition).
  Contact Now
Sulfadiazine is an organic compound with a molecular formula of C10H10N4O2S, white or off-white crystals or powders, odorless, tasteless, and gradually darkened when exposed to light. Almost insoluble in water, soluble in boiling water (1:60), slightly soluble in ethanol and acetone, insoluble in chloroform and ether, soluble in dilute hydrochloric acid, sodium hydroxide solution or ammonia solution. Melting point 252~256 °C (simultaneous decomposition). Its sodium salt is white crystalline powder, odorless, slightly bitter taste. Gradient brownish upon light.
  Contact Now
Chemical propertiesFormaldehyde and resorcinol react under alkaline conditions to form orange-red compounds, which are colorimetric at a maximum absorption wavelength of 460nm to detect low traces of formaldehyde in textile and clothing.Since resorcinol can undergo enol and ketone form tautomerism, it can react with ammonia as follows:Ketone reaction of resorcinolUnder the action of ammonia, m-phenyltriamine is obtained by reaction in ketone, and the amine is hydrolyzed in the aqueous solution of acid to obtain resorcinol.
  Contact Now
Molecular shape dataMolar refractive index: 41.72Molar extent (cm3/mol): 128.4Isotonic unique quantity (90.2K): 338.5Surface tension (dyne/cm): 48.2Polarizability (10-24cm3): 16.54Computational chemical dataHydrophobic parameters calculation reference price (XlogP): 1.7Number of hydrogen bonded donors: 1Number of hydrogen bond receptors: threeNumber of rotatable chemical bonds: 1Number of tautomers:Topological molecular polar floor place (TPSA): 54.4Number of heavy atoms: elevenSurface charge: zeroComplexity:
  Contact Now
Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylEnglish aliases more Ethyl trifluoroacetoacetate physicochemical propertiesDensity 1.3±0.1 g/cm3boiling point 129.5±0.0 °C at 760 mmHgMelting point -39 °CMolecular Formula C6H7F3O3Molecular weight 184.113flash point 28.9±0.0 °CExact Mass 184.034729Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylWear antistatic overalls and rubb
  Contact Now
Trehalose, also known as fenose and fungose, is a non-reducing disaccharide composed of two glucose molecules with the molecular formula C12H22O11 [8].
  Contact Now
Hydrazine hydrate, additionally recognised as hydrazine hydrate, is a colorless and obvious oily liquid with a mild ammonia smell, smoke in humid air, and is exceedingly alkaline and hygroscopic.
  Contact Now
CAS:86087-23-2S-3-Hydroxytetrahydrofuran [1]English name: S-3-hydroxytetrahydrofuranChinese aliases: (S)-(+)3-hydroxy-tetrahydrofuran; (S)-(+)-3-Hydroxytetrahydrofuran; (S)-3-Hydroxytetrahydrofuran;S-3-Hydroxytetrahydrofuran; Afatinib intermediatesSYNONYMS: (S)-(+)-3-HYDROXY TETAHYDRO FURAN; (S)-(-)-3-HYDROXY TETRAHYDRO FURAN; S-(+)-3-HYDROXYTETRAHYDROFURAN; (S)-3-Hydroxyterthydrofurane; S-(+)-3-Hydroxytetrahydofuran; (2S)-2-Hydroxy-1,4-epoxybutane; (3S)-3-Hydroxytetrahydrofuran; (2S)-1,4-Epoxy-2-hydroxybutane; Afatinib intermediatesCAS:86087-23-2Molecular formula: C4H8O2Molecular weight: 88.1
  Contact Now
Heptoic,acidhexacidc-7,Hexacid, C-7n-heptanoic,heptoicacid,Hepthlic, acidEnanthic, AcidOenanthic, acidEnanthylic acidHeptylic acid1-Hexanecarboxylic acidn-Heptoic acidOenanthylic acidEnanthoic acidNSC 2192n-Heptanoic acidn-Heptylic acidProduction methods and usesmethod GC,NMRHeptanaldehyde is carbonylated from 1-hexene with syngas (CO+H2), and then oxidized by air.Heptanaldehyde is prepared by carbonylation of heptene-1 and syngas, and then heptanoic acid is obtained by air oxidation.
  Contact Now
N,N-dimethylformamide is an natural compound with the components C3H7NO and is a colorless obvious liquid. It is no longer solely a chemical uncooked fabric with a large vary of uses, however additionally an tremendous solvent with a broad vary of uses.
  Contact Now
Rare earth chitosamine chelated saltsRare earth chitosamine integration salts are special compounds that are composed of rare earth elements and chitosamine formed integrators. In chemistry, integration refers to the combination of one or more coordination groups (usually dominated by oxygen and ammonia atoms) with metal ions to form a stable complex.
  Contact Now
Purpose 1Biochemical studies, adrenocorticosteroid drugs.Purpose 2Glucocorticoids have four major effects: anti-inflammatory, anti-allergic, anti-toxin, and anti-shock.Purpose 3The adrenal cortex secretes the main glucocorticoid, which has three times the anti-inflammatory power of corticosterone.Refer to quality standardsThe content is 96%-104%, mp212-220°C, the specific rotation [α] 20D+161°-+169°, the absorbance coefficient (A) is 428-450, and the content of impurities such as loss on drying and burning residue is detected.
  Contact Now
Experimental characteristicsLogP 2.47600PSA 55.98000Melting factor 153-155°CDensity 1.215Calculate the characteristicsExact molecular weight 198.07900Number of hydrogen bonded donors 1Number of hydrogen bond receptors 3Number of rotatable chemical bonds 2Number of heavy atoms 15Complexity 230Number of isotope atoms 0Determine the range of atomic stereoscopic facilities 0The wide variety of atomic stereoscopic facilities is unsure 0Determine the quantity of chemical bond stereotactic facilities 0The wide variet
  Contact Now
Magnesium sulfate solution, volumetric laxatives and choleretic agents. It is used for catharsis, choleretic, duodenal drainage and local swelling.Ingredients BroadcastThe main component of this product is magnesium sulfate.It is a sterilized aqueous solution of magnesium sulfate. Magnesium sulfate (MgSO4.7H2O) should be 95.0%~105.0% of the labeled amount.Molecular formula: MgSO4·7H2OMolecular weight: 246.48Indications BroadcastVolumetric laxatives and choleretics.
  Contact Now
Sodium gluconate is a type of natural matter, chemical components C6H11NaO7, in the enterprise is very extensively used, sodium gluconate can be used in construction, fabric printing and dyeing and metallic floor cure and water remedy industries as environment friendly chelating agent, metal floor cleansing agent, glass bottle cleansing agent, electroplating industrial aluminum oxide coloring, in the concrete enterprise as a excessive effectivity
  Contact Now
Heptoic,acidhexacidc-7,Hexacid, C-7n-heptanoic,heptoicacid,Hepthlic, acidEnanthic, AcidOenanthic, acidEnanthylic acidHeptylic acid1-Hexanecarboxylic acidn-Heptoic acidOenanthylic acidEnanthoic acidNSC 2192n-Heptanoic acidn-Heptylic acidProduction methods and usesmethodGC,NMRHeptanaldehyde is carbonylated from 1-hexene with syngas (CO+H2), and then oxidized by air.Heptanaldehyde is prepared by carbonylation of heptene-1 and syngas, and then heptanoic acid is obtained by air oxidation.
  Contact Now
Mercaptoacetic acid, is an natural acid, chemical components is C2H4O2S, is a colorless obvious liquid, has a sturdy disagreeable odor, miscible with water, miscible in ethanol, ether, soluble in everyday solvents, fast oxidation in air, in case of open flame, excessive warmness power combustion and launch of relatively poisonous hydrogen sulfide gas, broadly speaking used as blanket ending agent and bloodless scalding liquid uncooked materials.P
  Contact Now
Sodium hyaluronate, chemical formula (C14H20NO11Na)n, is an inherent component of the human body, is a glucuronic acid, no specific species, it is widely present in placenta, amniotic fluid, lens, articular cartilage, skin dermis and other tissues and organs. It is distributed in the cytoplasm and interstitium, which lubricates and nourishes the cells contained in it and the cellular organs themselves.It also provides a microenvironment for cell metabolism.
  Contact Now
Method 1Its preparation methods are as follows:2,4-disulfophenol alkali melt hydrolysis method;o-chlorophenol hydrolysis;phenol direct oxidation;phenolic oxidation;O-hydroxycyclohexanone dehydroaromatization.Among them, (1) and (2) the process is complex, the three wastes are polluted, and they are gradually replaced by new processes, while methods (4) and methods (5) are being industrialized abroad.
  Contact Now
Chemical composition informationINCI: 1,2-Hexanediol (1,2-Hexanediol)CAS No.:6920-22-5Molecular formula: C₆ H₁₄ O₂Molecular weight: 118.18g/molSpecific parametersAppearance: colorless obvious liquidOdor: totally odorlessPurity: >99.8%Water content: <0.2%Relative density (20°C): 0.946-0.956 g/cmRefractive index (25°C): 1.437-1.447pH (25°C): 6.5±0.5Boiling point: 223-224°C (at 760.00mm Hg)Air pressure: 9mbar (at 108°C)Flash point: 122°CMelting point: forty five °cStorage: Sealed storage in a cool location away from mild and keep away f
  Contact Now
An natural compound, colorless obvious liquid with a relative density of 0.971, soluble in natural solvents such as alcohols, ethers and ethyl acetate.
  Contact Now
2,3,4,5-TETRAFLUORBENZOYLCHLORID2,3,4,5-TETRAFLUOROBENZOYL CHLORIDEBenzoyl chloride, 2,3,4,5-tetrafluoro- (9CI)2,3,4,5-Tetrafluorobenzoyl2,3,4,5-Tetrafluorobenzoyl chloride 98%2,3,4,5-TETRAFLUOROBEZOYL CHLORIDE2,3,4,5-Tetrafluorobenzoylchloride98%94-24-62,3,4,5-Tetrafluorobenzoic acid chlorideBoiling point 65-66 °C 10mmDensity: 1.58 g/mL at 25 °C(lit.)Refractive index n20/D 1.4787(lit.)Flash point 194 °FSpecific gravity 1.580Sensitivity: Moisture sensitivityBRN5266860InChIKeyXWCKIXLTBNGIHV-UHFFFAOYSA-NCAS DataBase Reference94695-48-4
  Contact Now
Relate News
I. Overview of chemical and pharmaceutical intermediatesChemical pharmaceutical intermediates are a very important part of the pharmaceutical industry, referring to raw materials or semi-finished products in the pharmaceutical industry. These substances undergo a series of chemical reactions to eventually form pharmaceutical products. These chemicals usually exist in liquid or solid form and belong to various types of organic compounds such as acids, alcohols, carboxylic acids, phenols, cork and so on.
April 23, 2020. Customized in the middle of Shandong Pharmaceutical. The so -called Shandong pharmaceutical intermediate is actually some chemical raw materials or chemical products for drug synthesis process. This kind of chemical product does not require the production license of drugs. It can be produced in ordinary chemical plants. As long as it reaches some levels, it can be used for the synthesis of drugs.There are more than 2,000 raw materials and intermediates that need to be matched with chemicals each year, with more than 2.5 million tons.
Intermediate production of chemical medicine is a work involving a large number of chemicals. If it is not managed and controlled correctly, it may bring serious risks and pollution to the environment. In order to reduce environmental risks in the production of chemical medicine, we need to improve and control from the following aspects.First, establish a scientific and standardized production process. The production of chemical medicine needs to go through multiple steps and reactions. Each step needs to carefully evaluate and formulate corresponding operating procedures.
Medicine intermediate refers to a compound generated as an intermediate step in the process of synthetic drugs. It has high purity and activity, which can synthesize target drugs through further chemical reactions. Medicine intermediates are widely used in the pharmaceutical industry, covering multiple fields. The classification of pharmaceutical intermediates and its application areas will be introduced below.1. Carboxylic acid intermediate:The intermediate of the carboxylic acid refers to the compound of the carboxylic acid group, and the common ones are benzoic acid and propylic acid.
May 13, 2020. Pharmaceutical intermediate body fluorine customized. Pharmaceutical fluorine: colorless liquid. The melting point -42 ℃. Boiling point 85 ° C. Refractive index (ND20) 1.4650. Relators (D420) 1.024. Insuvenate in water and mixes with ethanol, ether, acetone, and benzene. Apineine reacts through Schiemann (G. Schiemann).Ah. After the aniline was descended to -8 ° C after 31%hydrochloride, and the sodium nitrite solution was nitroded.
Shandong is one of the important pharmaceutical production bases in the country, and the production production is relatively concentrated. The treatment of Shandong Pharmaceutical Intermediate waste is essential for protecting the environment, human health, and sustainable enterprise. This article will discuss how to properly handle waste in the production of Shandong pharmaceutical intermediates.First, reasonable classification and storage wasteReasonable classification and storage waste are the first step in waste treatment.