Hexacid C-7-manufacture,factory,supplier from China

Appearance: Yellow needle-like crystals.

Heptoic,acidhexacidc-7,Hexacid, C-7n-heptanoic,heptoicacid,Hepthlic, acidEnanthic, AcidOenanthic, acidEnanthylic acidHeptylic acid1-Hexanecarboxylic acidn-Heptoic acidOenanthylic acidEnanthoic acidNSC 2192n-Heptanoic acidn-Heptylic acidProduction methods and usesmethodGC,NMRHeptanaldehyde is carbonylated from 1-hexene with syngas (CO+H2), and then oxidized by air.Heptanaldehyde is prepared by carbonylation of heptene-1 and syngas, and then heptanoic acid is obtained by air oxidation.

Heptoic,acidhexacidc-7,Hexacid, C-7n-heptanoic,heptoicacid,Hepthlic, acidEnanthic, AcidOenanthic, acidEnanthylic acidHeptylic acid1-Hexanecarboxylic acidn-Heptoic acidOenanthylic acidEnanthoic acidNSC 2192n-Heptanoic acidn-Heptylic acidProduction methods and usesmethod GC,NMRHeptanaldehyde is carbonylated from 1-hexene with syngas (CO+H2), and then oxidized by air.Heptanaldehyde is prepared by carbonylation of heptene-1 and syngas, and then heptanoic acid is obtained by air oxidation.

Appearance: white or off-white crystalline powder, odorless, bitter taste. Deterioration in contact with light. Mp214-220°C (decomposition); Specific rotation [α] 25D+157.5° (dioxane), +176° (chloroform), +162°-+169° (ethanol); The ethanol solution has a maximum absorption at a wavelength of 242 nm. This product is insoluble in water, insoluble in ether, slightly soluble in chloroform, soluble in acetone, ethanol. Soluble in concentrated sulfuric acid solution and green fluorescence.

Quality standardsOff-white to mild yellow crystalline appearanceContent 299% (HPLC)Melting factor 216-220°C(s2C)Moisture S21.5%Ignition residue S0.2%The ethanol water dissolution take a look at (thousand products) is qualifiedUses: used in pharmaceuticals, organic reagents, dyes, can additionally be used to synthesize 5,7-dimeryl flavonoids.As a medicine, resorcinol immediately acts on the clean muscle of the gastrointestinal tract and genitourinary tract, and is a prophilic non-atropine non-sinosynergine pure clean&nbs

Appearance: yellow or orange-yellow crystalline powder; Odorless and tasteless; It is easy to decompose when exposed to lightMelting point 49-51 °cBoiling Point: 715.32°C (rough estimate)Density0.9145 (rough estimate)refractive index: 1.4760 (estimate)Storage conditions: −20°CSolubility is easily soluble in chloroform.Morphological neatColor: light orange to dark orangeSensitive to photosMerck9843BRN1900141Stable but may be sensitive to light or heat. Store at -20°C protected from light.

Materialized propertiesDensity:1.52±0.1 g/cm3(Predicted)Boiling point:545.3±50.0 °C(Predicted)PSA：80.65000logP：2.52900Acidity coefficient (PKA):11.15±0.70(Predicted)English alias(S)-Methyl 3-(7-bromo-2-oxo-5-(pyridin-2-yl)-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)propanoate1H-1,4-Benzodiazepine-3-propanoic acid, 7-bromo-2,3-dihydro-2-oxo-5-(2- pyridinyl)-, methyl ester, (3S)-(3S)-(7-BroMo-2-oxo-5-pyridin-2-yl-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)-propionic acid Methyl esterMethyl 3-[(3S)-7-bromo-2-oxo-5-(2- pyridinyl)-2,3-dihydro-1H-1,4-benzodiazepin-3-yl]propanoateCAS308242-23-1InchiInC

L-alanine is an organic compound with the formula C3H7NO2, is a colorless to white crystalline powder, soluble in water, ethanol, insoluble in ether and acetone. It is mainly used in biochemical research, tissue culture, liver function determination, flavor enhancer, can increase the seasoning effect of condiments, and can also be used as a sour taste correction agent to improve the sour taste of organic acids.Physical data1. Properties: colorless orthorhombic crystal or crystalline powder.2. Density (g/mL, 25/4°C): 1.4323. Relative vapor density (g/mL, air = 1): not determined4.

English alias(S)-Methyl 3-(7-bromo-2-oxo-5-(pyridin-2-yl)-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)propanoate1H-1,4-Benzodiazepine-3-propanoic acid, 7-bromo-2,3-dihydro-2-oxo-5-(2- pyridinyl)-, methyl ester, (3S)-(3S)-(7-BroMo-2-oxo-5-pyridin-2-yl-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)-propionic acid Methyl esterMethyl 3-[(3S)-7-bromo-2-oxo-5-(2- pyridinyl)-2,3-dihydro-1H-1,4-benzodiazepin-3-yl]propanoateCAS308242-23-1InchiInChI=1S/C18H16BrN3O3/c1-25-16(23)8-7-15-18(24)22-13-6-5-11(19)10-12(13)17(21-15)14-4-2-3-9-20-14/h2-6,9-10,15H,7-8H2,1H3,(H,22,24)/t15-/m0/s1InChIkeyPITXBYGUVDYTBQ-HNN

melting point:248 °C (decomp)Density1.3175 (rough estimate)refractive index1.5630 (estimate)Storage conditionsKeep in dark place,Inert atmosphere,Room temperatureSolubility DMSO : 6 mg/mL (19.95 mM)InChIInChI=1S/C12H17N4OS.

Trehalose, also known as fenose and fungose, is a non-reducing disaccharide composed of two glucose molecules with the molecular formula C12H22O11 [8].

Alprazolam, is an natural compound with the components C17H13ClN4, commonly used for the cure of anxiety, depression, insomnia, can be used as an anti-panic drug, however additionally can relieve acute alcohol withdrawal symptoms, can additionally have a true therapeutic impact on drug-induced intractable hiccups.Pharmacological actionThis product is a new BDZ category drug, with comparable pharmacological outcomes as diazepam, with anxiolytic, antidepressant, sedative, hypnotic,

Appearance: Colorless liquid. The boiling point is 189 °C, the relative density is 1.073 (25/4 °C), the refractive index is 1.4494, and the flash point is 76 °C. Soluble in organic solvents, insoluble in water.Melting point -52 °cBoiling Point: 189 °C(lit.)Density 1.075 g/mL at 20 °CVapor pressure 4.2hPa at 25°CRefractive index n20/D 1.449(lit.)Flash point 169 °FStorage conditions RefrigeratorMorphological liquidThe color is transparentWater solubility: 0.5-1.0 g/100 mL at 20 ºCBRN2506Stability is unstable. Sensitivity to light. MEHQ of about 100 ppm can be used as a stabilizer.

1. Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver. Put the fresh intestinal mucosa into the reaction pot, add sodium chloride at 3%, and adjust the pH to 9.5 with 40% sodium hydroxide. Gradually heat up to 60-65 ° C within half an hour, continue to hold heat and stir for 2h, then heat up to 95 ° C, maintain for 10min, cool to below 50 ° C and filter.

Salicylic acid, a kind of organic acid, chemical formula C7H6O3, is a white crystalline powder, slightly soluble in cold water, easily soluble in hot water, ethanol, ether and acetone, soluble in hot benzene, mainly used as medicine, spices, dyes, pesticides, rubber additives and other important raw materials of fine chemicals.1.

Sodium hyaluronate, chemical formula (C14H20NO11Na)n, is an inherent component of the human body, is a glucuronic acid, no specific species, it is widely present in placenta, amniotic fluid, lens, articular cartilage, skin dermis and other tissues and organs. It is distributed in the cytoplasm and interstitium, which lubricates and nourishes the cells contained in it and the cellular organs themselves.It also provides a microenvironment for cell metabolism.

Experimental characteristicsLogP 2.47600PSA 55.98000Melting factor 153-155°CDensity 1.215Calculate the characteristicsExact molecular weight 198.07900Number of hydrogen bonded donors 1Number of hydrogen bond receptors 3Number of rotatable chemical bonds 2Number of heavy atoms 15Complexity 230Number of isotope atoms 0Determine the range of atomic stereoscopic facilities 0The wide variety of atomic stereoscopic facilities is unsure 0Determine the quantity of chemical bond stereotactic facilities 0The wide variet

Chemical and physical properties of benzophenone hydrazoneDensity 1.1±0.1 g/cm3Boiling point 328.0±11.0 °C at 760 mmHgmelting point 95-98 °C(lit.)Molecular Formula C13H12N2Molecular weight 196.248Flash point 152.1±19.3 °CExact mass 196.100052PSA 38.38000LogP 2.79Appearance: White crystalline powderVapor pressure 0.0±0.7 mmHg at 25°CThe refractive index is 1.584Storage conditionsProtect from light, cool and dry place, sealed and storedstabilityStable at room temperature and pressure, white crystalline powder.MolecularMolecular property data:1. Molar refractive index: 62.322.

Purpose 1Biochemical studies, adrenocorticosteroid drugs.Purpose 2Glucocorticoids have four major effects: anti-inflammatory, anti-allergic, anti-toxin, and anti-shock.Purpose 3The adrenal cortex secretes the main glucocorticoid, which has three times the anti-inflammatory power of corticosterone.Refer to quality standardsThe content is 96%-104%, mp212-220°C, the specific rotation [α] 20D+161°-+169°, the absorbance coefficient (A) is 428-450, and the content of impurities such as loss on drying and burning residue is detected.

CAS1563-56-0InchiInChI=1S/C12H9BrN2O/c13-8-4-5-10(14)9(7-8)12(16)11-3-1-2-6-15-11/h1-7H,14H2InChIkeyKHVZPFKJBLTYCC-UHFFFAOYSA-NChinese aliasBromazepam Impurity A Bromazepam Impurity A(EP) Standard 2-Amino-5-bromophenyl-2-pyridylmethanone 2-(2-amino-5-bromobenzoyl)pyridineCanonical SmilesC1=CC=NC(=C1)C(=O)C2=C(C=CC(=C2)Br)NInternationalization joint naming(2-amino-5-bromophenyl)-pyridin-2-ylmethanoneEnglish alias2-(5-Bromo-2-aminobenzoyl)pyridine(2-Amino-5-bromophenyl)-2-pyridinylmethanone2-(2-Amino-5-bromobenzoyl)pyridineKetone, 2-amino-5-bromophenyl 2-pyridyl2-Amino-5-bromophenyl-2-pyridylmet

Chemical composition informationINCI: 1,2-Hexanediol (1,2-Hexanediol)CAS No.：6920-22-5Molecular formula: C₆ H₁₄ O₂Molecular weight: 118.18g/molSpecific parametersAppearance: colorless transparent liquidOdor: completely odorlessPurity: >99.8%Water content: <0.2%Relative density (20°C): 0.946-0.956 g/cmRefractive index (25°C): 1.437-1.447pH (25°C): 6.5±0.5Boiling point: 223-224°C (at 760.00mm Hg)Air pressure: 9mbar (at 108°C)Flash point: 122°CMelting point: 45 °cStorage: Sealed storage in a cool place away from light and avoid high temperatures.Product advantages● Excellent grade, high pur

Appearance: Colorless liquid. The boiling point is 189 °C, the relative density is 1.073 (25/4 °C), the refractive index is 1.4494, and the flash point is 76 °C. Soluble in organic solvents, insoluble in water.Melting point -52 °cBoiling Point: 189 °C(lit.)Density 1.075 g/mL at 20 °CVapor pressure 4.2hPa at 25°CRefractive index n20/D 1.449(lit.)Flash point 169 °FStorage conditions RefrigeratorMorphological liquidThe color is transparentWater solubility: 0.5-1.0 g/100 mL at 20 ºCBRN2506Stability is unstable. Sensitivity to light. MEHQ of about 100 ppm can be used as a stabilizer.

2,3,4,5-TETRAFLUORBENZOYLCHLORID2,3,4,5-TETRAFLUOROBENZOYL CHLORIDEBenzoyl chloride, 2,3,4,5-tetrafluoro- (9CI)2,3,4,5-Tetrafluorobenzoyl2,3,4,5-Tetrafluorobenzoyl chloride 98%2,3,4,5-TETRAFLUOROBEZOYL CHLORIDE2,3,4,5-Tetrafluorobenzoylchloride98%94-24-62,3,4,5-Tetrafluorobenzoic acid chlorideBoiling point 65-66 °C 10mmDensity: 1.58 g/mL at 25 °C(lit.)Refractive index n20/D 1.4787(lit.)Flash point 194 °FSpecific gravity 1.580Sensitivity: Moisture sensitivityBRN5266860InChIKeyXWCKIXLTBNGIHV-UHFFFAOYSA-NCAS DataBase Reference94695-48-4

Appearance: White crystalline.Melting Point: 210 °C (subl.) (lit.)Flash point 198 °CStorage conditionsKeep in dark place,Inert atmosphere,Room temperatureMorphological crystalline powderColor: off-white to yellowish-beigePH 2.0 (100g/l, H2O, 20°C)Water solubility is easily soluble in water.Detection Method: HPLCBRN3684904InChIKeyXGAFCCUNHIMIRV-UHFFFAOYSA-NCAS DataBase Reference7379-35-3EPA Chemical Substance Information 4-Chloropyridine hydrochloride (7379-35-3)apply4-chloropyridine hydrochloride is an important intermediate in organic synthesis, which is widely used in the preparation of new