HCOOH-manufacture,factory,supplier from China

Formic acid is an natural substance with the chemical system HCOOH and a molecular weight of 46.03 , usually recognized as formic acid, which is the easiest carboxylic acid. A colorless liquid with a pungent odor. Formic acid is a susceptible electrolyte, however its aqueous answer is weakly acidic and corrosive, which can stimulate pores and skin blistering. It is typically determined in the secretions of bees, positive ants, and caterpillars.

Formic acid is an organic substance with the chemical formula HCOOH and a molecular weight of 46.03 , commonly known as formic acid, which is the simplest carboxylic acid. A colorless liquid with a pungent odor. Formic acid is a weak electrolyte, but its aqueous solution is weakly acidic and corrosive, which can stimulate skin blistering. It is usually found in the secretions of bees, certain ants, and caterpillars. It is an organic chemical raw material, also used as a disinfectant and preservative.Formic acid was first developed by J. J. -L.

Purpose 1used as pharmaceutical uncooked materials, fitness care products, intermediates, meals additives, etcPurpose 2D-ribose is an vital issue of nucleic acid, the genetic fabric in residing organisms, which occupies a pivotal function in the metabolism of nucleosides, proteins and fats, and has necessary physiological features and huge software prospects.

Appearance: Colorless liquid. The boiling point is 189 °C, the relative density is 1.073 (25/4 °C), the refractive index is 1.4494, and the flash point is 76 °C. Soluble in organic solvents, insoluble in water.Melting point -52 °cBoiling Point: 189 °C(lit.)Density 1.075 g/mL at 20 °CVapor pressure 4.2hPa at 25°CRefractive index n20/D 1.449(lit.)Flash point 169 °FStorage conditions RefrigeratorMorphological liquidThe color is transparentWater solubility: 0.5-1.0 g/100 mL at 20 ºCBRN2506Stability is unstable. Sensitivity to light. MEHQ of about 100 ppm can be used as a stabilizer.

Appearance characteristicsThis product is white crystal, m.p.138~140 °C, insoluble in water, soluble in alcohol, ether, etc.Melting Point: 134-136 °C (lit.)Melting Point: 134-136 °C(lit.)Boiling Point: 272.96°C (rough estimate)Density 1.35Density 1.35refractive index1.4500 (estimate)Flash point 250 °CFlash point 250 °CStorage conditions: 2-8 °CStorage conditionsStore at RT.Solubility H2O: 10 mg/mL at 37 °CSolubility in water Solubility 10 mg/mLat 37 °CMorphological crystallineThe color is whiteAcidity coefficient (pKa): 3.5 (at 25°C)Water solubility: 3.3 g/L (20 ºC)Merck14,851BRN779271Exposure

Purpose 1Biochemical studies, adrenocorticosteroid drugs.Purpose 2Glucocorticoids have four major effects: anti-inflammatory, anti-allergic, anti-toxin, and anti-shock.Purpose 3The adrenal cortex secretes the main glucocorticoid, which has three times the anti-inflammatory power of corticosterone.Refer to quality standardsThe content is 96%-104%, mp212-220°C, the specific rotation [α] 20D+161°-+169°, the absorbance coefficient (A) is 428-450, and the content of impurities such as loss on drying and burning residue is detected.

Chinese name nitrobenzeneEnglish name nitrobenzeneEnglish aliases more Nitrobenzene physicochemical propertiesDensity 1.205boiling point 210-211 °C(lit.)melting point 5-6 °C(lit.)Molecular Formula C6H5NO2Molecular Weight: 123.10900Flash point 190 °FExact mass 123.03200PSA 45.82000LogP 2.11800Appearance traits yellow liquidVapor density 4.2 (vs air)Vapour pressure 0.15 mm Hg ( 20 °C)refractive index n20/D 1.551(lit.)Storage conditions Storage precautions Store in a cool, ventilated warehouse. Keep away from tinder, heat sources. Keep the container tightly sealed.

Sodium hyaluronate, chemical system (C14H20NO11Na)n, is an inherent thing of the human body, is a glucuronic acid, no particular species, it is extensively current in placenta, amniotic fluid, lens, articular cartilage, pores and skin dermis and different tissues and organs. It is disbursed in the cytoplasm and interstitium, which lubricates and nourishes the cells contained in it and the cell organs themselves.It additionally presents a microenvironment for cellphone metabolism.

Experimental characteristicsLogP 2.47600PSA 55.98000Melting factor 153-155°CDensity 1.215Calculate the characteristicsExact molecular weight 198.07900Number of hydrogen bonded donors 1Number of hydrogen bond receptors 3Number of rotatable chemical bonds 2Number of heavy atoms 15Complexity 230Number of isotope atoms 0Determine the range of atomic stereoscopic facilities 0The wide variety of atomic stereoscopic facilities is unsure 0Determine the quantity of chemical bond stereotactic facilities 0The wide variet

L-alanine is an organic compound with the formula C3H7NO2, is a colorless to white crystalline powder, soluble in water, ethanol, insoluble in ether and acetone. It is mainly used in biochemical research, tissue culture, liver function determination, flavor enhancer, can increase the seasoning effect of condiments, and can also be used as a sour taste correction agent to improve the sour taste of organic acids.Physical data1. Properties: colorless orthorhombic crystal or crystalline powder.2. Density (g/mL, 25/4°C): 1.4323. Relative vapor density (g/mL, air = 1): not determined4.

Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylEnglish aliases more Ethyl trifluoroacetoacetate physicochemical propertiesDensity 1.3±0.1 g/cm3boiling point 129.5±0.0 °C at 760 mmHgMelting point -39 °CMolecular Formula C6H7F3O3Molecular weight 184.113flash point 28.9±0.0 °CExact Mass 184.034729Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylWear antistatic overalls and rubb

Cetyl dimethyl tertiary amine is an industrial fungicide. Industrial fungicides refer to preparations used in industry to kill or inhibit the growth of microorganisms, and there are many application fields.

Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylEnglish aliases more Ethyl trifluoroacetoacetate physicochemical propertiesDensity 1.3±0.1 g/cm3boiling point 129.5±0.0 °C at 760 mmHgMelting point -39 °CMolecular Formula C6H7F3O3Molecular weight 184.113flash point 28.9±0.0 °CExact Mass 184.034729Chinese name Ethyl trifluoroacetoacetateEnglish name Ethyl 4,4,4-trifluoroacetoacetateChinese alias ethyl 4,4,4-trifluoroacetoacetate | 4,4,4-TrifluoroacetylEnglish alias  Ethyl trifluo

Character description: colorless transparent liquid. Melting point -90.2C, boiling point 117.7 °C, relative density 0.8098 (20/4C), refractive index 1.3993, flash point 35.35.5 °C, spontaneous ignition point 365 °C. The solubility in water at 20 °C is 7.7% (mass), and the solubility of water in n-butanol is 20.1% (mass). Miscible with ethanol, ethyl and other organic solvents. Vapor forms an explosive mixture with air, with an explosion limit of 1.45-11.25 (volume). It can form an azeotropic mixture with water, its boiling point is 92 °C, and the water content is 37%.

Method 1Its preparation methods are as follows:2,4-disulfophenol alkali melt hydrolysis method;o-chlorophenol hydrolysis;phenol direct oxidation;phenolic oxidation;O-hydroxycyclohexanone dehydroaromatization.Among them, (1) and (2) the process is complex, the three wastes are polluted, and they are gradually replaced by new processes, while methods (4) and methods (5) are being industrialized abroad.

Cloxazon, chemical name 5-chloro-2-benzoxazolidone, molecular formula C7H4ClNO2, is a muscle relaxant acting on the center, used for various acute and chronic soft tissue (muscle, ligament) sprains, contusions, muscle aches after exercise, muscle spasms caused by central neuropathy and chronic fasciitis.【Chinese alias】Muscle relaxant; Chlordobenazole; 5-Chloro-2-hydroxybenzoxazole; Chloroxazolone; Chlordobenazole; Chlordobenazole; 5-Chloro-2-benzoxazolinone; 5-Chloro-2-benzoxazolone; 6-Chlorobenzoxazolone.【Molecular Formula】C7H4ClNO2 【Molecular Weight】169.57 【CAS】95-25-0【Usage and dosage】Oral:

Glycine (Gly), additionally regarded as glycine, is a non-essential amino acid with the system C2H5NO2. Glycine is a constituent amino acid of the endogenous antioxidant decreased glutathione, which is regularly supplemented exogenously in the course of extreme stress in the body, and is occasionally known as a semi-essential amino acid. [1] Glycine is one of the easiest amino acids. [4]Solid glycine is a white to off-white crystalline powder, odorless, non-toxic [2].

2,3,4,5-TETRAFLUORBENZOYLCHLORID2,3,4,5-TETRAFLUOROBENZOYL CHLORIDEBenzoyl chloride, 2,3,4,5-tetrafluoro- (9CI)2,3,4,5-Tetrafluorobenzoyl2,3,4,5-Tetrafluorobenzoyl chloride 98%2,3,4,5-TETRAFLUOROBEZOYL CHLORIDE2,3,4,5-Tetrafluorobenzoylchloride98%94-24-62,3,4,5-Tetrafluorobenzoic acid chlorideBoiling point 65-66 °C 10mmDensity: 1.58 g/mL at 25 °C(lit.)Refractive index n20/D 1.4787(lit.)Flash point 194 °FSpecific gravity 1.580Sensitivity: Moisture sensitivityBRN5266860InChIKeyXWCKIXLTBNGIHV-UHFFFAOYSA-NCAS DataBase Reference94695-48-4

2,3,4,5-TETRAFLUORBENZOYLCHLORID2,3,4,5-TETRAFLUOROBENZOYL CHLORIDEBenzoyl chloride, 2,3,4,5-tetrafluoro- (9CI)2,3,4,5-Tetrafluorobenzoyl2,3,4,5-Tetrafluorobenzoyl chloride 98%2,3,4,5-TETRAFLUOROBEZOYL CHLORIDE2,3,4,5-Tetrafluorobenzoylchloride98%94-24-62,3,4,5-Tetrafluorobenzoic acid chlorideBoiling point 65-66 °C 10mmDensity: 1.58 g/mL at 25 °C(lit.)Refractive index n20/D 1.4787(lit.)Flash point 194 °FSpecific gravity 1.580Sensitivity: Moisture sensitivityBRN5266860InChIKeyXWCKIXLTBNGIHV-UHFFFAOYSA-NCAS DataBase Reference94695-48-4

Fields of applicationPurpose 1It is suitable for vitamin B1 deficiency, has the function of maintaining normal glucose metabolism and nerve conduction, and is also used for the adjuvant treatment of dyspepsia and neuritisPreparation method:Method 1Thiamine hydrochloride is usually obtained by condensation, hydrolysis, neutralization, oxidation, and acidification of excess acetamidine hydrochloride with α-dimethoxy β-methoxypropionitrile.Upstream and downstream product informationUpstream raw materialsEthanol, hydrogen peroxide, dimethyl sulfate, ethyl chlorosulfonate, acrylonitrile, carboxylat

Boiling Point: 143-144 °C35 mm Hg(lit.)Density: 1.568 g/mL at 25 °C(lit.)Refractive index n20/D 1.572(lit.)Flash point > 230 °FSpecific gravity 1.568Sensitivity: Moisture sensitivityBRN4989077CAS DataBase Reference: 86393-34-2use2,4-Dichloro-5-fluorobenzoyl chloride is the main raw material for the preparation of third-generation quinolones such as trifluoroperidinol, trifluoroguabutenyl, pentafluridol and synthetic broad-spectrum antibiotics such as ciprofloxacin, and can also be used for pesticides, insecticides and ovicides, as well as the identification of plastics and resins.synthesisA

Mercaptoacetic acid, is an natural acid, chemical components is C2H4O2S, is a colorless obvious liquid, has a sturdy disagreeable odor, miscible with water, miscible in ethanol, ether, soluble in everyday solvents, fast oxidation in air, in case of open flame, excessive warmness power combustion and launch of relatively poisonous hydrogen sulfide gas, broadly speaking used as blanket ending agent and bloodless scalding liquid uncooked materials.P

Basic informationChemical formula: C4H4O4Molecular Weight: 116.072CAS number: 110-17-8EINECS number: 203-743-0Physical and chemical propertiesPhysicalDensity: 1.63g/cm3Melting point: 298-300°CBoiling point: 355.5 °cFlash point: 183 °cRefractive index: 1.526(20°C)Appearance: white powder or colorless crystalsSolubility: soluble in ethanol, slightly soluble in water and ether, insoluble in chloroform, carbon tetrachloride, benzeneChemical propertiesThe simplest unsaturated dicarboxylic acid. First found in fusso, it is also found in many kinds of mushrooms and fresh beef.

1. Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver. Put the fresh intestinal mucosa into the reaction pot, add sodium chloride at 3%, and adjust the pH to 9.5 with 40% sodium hydroxide. Gradually heat up to 60-65 ° C within half an hour, continue to hold heat and stir for 2h, then heat up to 95 ° C, maintain for 10min, cool to below 50 ° C and filter.