Cyclohexanone-manufacture,factory,supplier from China

(Total 24 Products for Cyclohexanone)
Cyclohexanone is an organic compound with the formula C6H10O , a saturated cyclic ketone with carbonyl carbon atoms included in a six-membered ring. Colorless transparent liquid with earthy smell, with mint smell when containing trace amounts of phenol. Impurities are light yellow, which develop color with the formation of impurities during storage time, and are water-white to gray-yellow, with a strong pungent odor. Mixed with air, the explosive pole is the same as open-chain saturated ketone.
  Contact Now
Cyclohexanone is an natural compound with the components C6H10O , a saturated cyclic ketone with carbonyl carbon atoms blanketed in a six-membered ring. Colorless obvious liquid with earthy smell, with mint scent when containing hint quantities of phenol. Impurities are mild yellow, which enhance shade with the formation of impurities throughout storage time, and are water-white to gray-yellow, with a sturdy pungent odor.
  Contact Now
apply4-chloropyridine hydrochloride is an important intermediate in organic synthesis, which is widely used in the preparation of new medicines, pesticides, dyes, etc.use4-Chloropyridine hydrochloride can be used as a pharmaceutical intermediate in the process of laboratory organic synthesis and chemical and pharmaceutical research and development, and pyridine base can be used to synthesize more than 50 drugs, including antitumor drugs, penicillin, vasodilators, nicotinate, inositol nicotinate, etc.preparationPyridine is used as the starting material, and 4-chloropyridine hydrochloride is syn
  Contact Now
Salicylic acid, a sort of natural acid, chemical method C7H6O3, is a white crystalline powder, barely soluble in bloodless water, effortlessly soluble in warm water, ethanol, ether and acetone, soluble in warm benzene, commonly used as medicine, spices, dyes, pesticides, rubber components and different essential uncooked substances of great chemicals.1.
  Contact Now
Trifluoroacetic acid, is an organic compound with the formula C2HF3O2, mainly used as a test reagent, solvent, catalyst and for organic synthesis.useMainly used as test reagent, solvent, catalyst and for organic synthesis.First aid measuresSkin contact: Immediately remove contaminated clothing and rinse with plenty of running water for at least 15 minutes. Medical treatment.Eye contact: Immediately lift the eyelid and rinse thoroughly with plenty of running water or saline for at least 15 minutes. Medical treatment.Inhalation: Quickly leave the scene to fresh air. Keep your airways open.
  Contact Now
Chemical propertiesFormaldehyde and resorcinol react beneath alkaline stipulations to structure orange-red compounds, which are colorimetric at a most absorption wavelength of 460nm to become aware of low traces of formaldehyde in fabric and clothing.Since resorcinol can endure enol and ketone structure tautomerism, it can react with ammonia as follows:Ketone response of resorcinolUnder the motion of ammonia, m-phenyltriamine is got with the aid of response in ketone, and the
  Contact Now
Pharmacology and toxicologyThis product is an amide neighborhood anesthetic.
  Contact Now
Chinese title nitrobenzeneEnglish title nitrobenzeneEnglish aliases moreNitrobenzene physicochemical propertiesDensity 1.205boiling factor 210-211 °C(lit.)melting factor 5-6 °C(lit.)Molecular Formula C6H5NO2Molecular Weight: 123.10900Flash factor one hundred ninety °FExact mass 123.03200PSA 45.82000LogP 2.11800Appearance qualities yellow liquidVapor density 4.2 (vs air)Vapour stress 0.15 mm Hg ( 20 °C)refractive index n20/D 1.551(lit.)Storage conditionsStorage precautions Store in a cool, ventilated warehouse.
  Contact Now
Chinese Name: 2-[(6-chloro-3,4-dihydro-3-methyl-2,4-dioxo-1(2H)-pyrimidine]methyl]butyronitrileEnglish name 2-((6-Chloro-3-methyl-2,4-dioxo-3,4-dihydropyrimidin-1(2H)-yl)methyl)benzonitrileChinese alias alogliptin-B | 2-[(6-Chloro-3,4-dihydro-3-methyl-2,4-dioxo-1(2H)-pyrimidinyl)methyl]benzonitrile | Alogliptin intermediate | Alogliptin benzoate intermediate 1English aliases more Physicochemical propertiesDensity 1.4±0.1 g/cm3boiling point 418.0±55.0 °C at 760 mmHgMolecular formula C13H10ClN3O2Molecular Weight: 275.690flash point 206.6±31.5 °CExact Mass 275.046143PSA67.79000LogP1.95Vapour
  Contact Now
1.3-Butanediol is an natural compound with a molecular formulation of C4H10O2, by and large used in the instruction of polyester resin, polyurethane resin, plasticizer, etc., and additionally used as a humidifier and softener for textiles, paper and tobacco.Chinese Name: 1,3-ButanediolChinese aliases: 1,3-Dihydroxybutane; (±)-1,3-ButanediolEnglish alias: Butanediol; butane-1,3-diol; (3S)-butane-1,3-diol; (3R)-butane-1,3-diolCAS:107-88-0EINECS:203-529-7FEMA registration number: 2842Physical and chemical indicatorsAppearance: colorless, viscous l
  Contact Now
Purpose 1Biochemical studies, adrenocorticosteroid drugs.Purpose 2Glucocorticoids have four major effects: anti-inflammatory, anti-allergic, anti-toxin, and anti-shock.Purpose 3The adrenal cortex secretes the main glucocorticoid, which has three times the anti-inflammatory power of corticosterone.Refer to quality standardsThe content is 96%-104%, mp212-220°C, the specific rotation [α] 20D+161°-+169°, the absorbance coefficient (A) is 428-450, and the content of impurities such as loss on drying and burning residue is detected.
  Contact Now
Guanidine acetate glycine and its derivatives, useful accelerator, does no longer include any unlawful drugs, no poisonous substances, protected to use besides discontinuation period.Appearance shape: white or yellowish powder, the provider will purpose the look colour to change, however does no longer have an effect on the impact of the product.Mechanism of motion Guanidinoacetic acid is a precursor to creatine.
  Contact Now
Clonazepam , with the formula C15H10ClN3O3 , is a benzodiazepine tranquilizer. Clinically, it is mainly used for: (1) treatment of epilepsy and convulsions, which are effective for all types of epilepsy, especially for small seizures and myoclonic seizures. Intravenous treatment of status epilepticus. (2) Treatment of anxiety and insomnia. (3) It is also effective for choreas. It also has a certain effect on drug-induced hyperactivity, chronic multiple convulsions, stiff man syndrome, and various types of neuralgia.The effect is similar to diazepam and nitrazepam.
  Contact Now
Also recognized as fluorenoneSpecification or purity 99%The English identify is 9-FluorenoneApplication It is a uncooked fabric for the practise of a range of first-class chemicals, commonly used in purposeful polymers, and it can additionally be used in medicine, pesticides, and dyes. 9-fluorenone has been extensively used as a precursor for the synthesis of a number natural digital materials.
  Contact Now
n-propanol, additionally acknowledged as 1-propanol, is an natural compound with a easy structural formulation of CH3CH2CH2OH, a molecular formulation of C3H8O, and a molecular weight of 60.10. At room temperature and pressure, n-propanol is a obvious colorless liquid with a sturdy musty scent comparable to exterior alcohol, soluble in water, ethanol and ether.
  Contact Now
Methylamine has a wide range of industrial uses.
  Contact Now
Appearance characteristicsThis product is white crystal, m.p.138~140 °C, insoluble in water, soluble in alcohol, ether, etc.Melting Point: 134-136 °C (lit.)Melting Point: 134-136 °C(lit.)Boiling Point: 272.96°C (rough estimate)Density 1.35Density 1.35refractive index1.4500 (estimate)Flash point 250 °CFlash point 250 °CStorage conditions: 2-8 °CStorage conditionsStore at RT.Solubility H2O: 10 mg/mL at 37 °CSolubility in water Solubility 10 mg/mLat 37 °CMorphological crystallineThe color is whiteAcidity coefficient (pKa): 3.5 (at 25°C)Water solubility: 3.3 g/L (20 ºC)Merck14,851BRN779271Exposure
  Contact Now
1. Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver. Put the fresh intestinal mucosa into the reaction pot, add sodium chloride at 3%, and adjust the pH to 9.5 with 40% sodium hydroxide. Gradually heat up to 60-65 ° C within half an hour, continue to hold heat and stir for 2h, then heat up to 95 ° C, maintain for 10min, cool to below 50 ° C and filter.
  Contact Now
Appearance: White crystalline.Melting Point: 210 °C (subl.) (lit.)Flash point 198 °CStorage conditionsKeep in dark place,Inert atmosphere,Room temperatureMorphological crystalline powderColor: off-white to yellowish-beigePH 2.0 (100g/l, H2O, 20°C)Water solubility is easily soluble in water.Detection Method: HPLCBRN3684904InChIKeyXGAFCCUNHIMIRV-UHFFFAOYSA-NCAS DataBase Reference7379-35-3EPA Chemical Substance Information 4-Chloropyridine hydrochloride (7379-35-3)apply4-chloropyridine hydrochloride is an important intermediate in organic synthesis, which is widely used in the preparation of new
  Contact Now
Brief introductionAE-active ester, chemical title 2-methoxyimino-2-(2-amino-4-thiazolyl)-(z)-thioacetic acid benzothiazole ester. Appearance: white or mild yellow crystalline powder, melting factor 128130 °C.
  Contact Now
Imidazole, molecular formulation C3H4N2, is an natural compound, a kind of diazole, a five-membered fragrant heterocyclic compound containing two meta-nitrogen atoms in its molecular structure.
  Contact Now
Basic informationChinese name: AtecaineChinese aliases: aceclofenac impurity H; Methyl 4-methyl-3-[[1-oxo-2-(propylamino)propyl]amino]-2-thiophenecarboxylate; [1]English name: Articaine;Methyl (4-methyl-3-(2-(propylamino)propionamido)-2-thiophencarboxylat); 3-(N-propyl-2-amino-propionylamino)-2-carbomethoxy-4-methylthiophene; 4-Methyl-3-(2-(propylamino)propionamido)-2-thiophenecarboxylic acid,methyl ester; Articaina [INN-Spanish]; Carticaine;Aticaine compound is a white crystalline powder with the formula 4-methyl-3-[[1-oxo-2-(propylamino)propyl]amino]-2-thiophenecarboxylate.
  Contact Now
The appearance is colorless and crystalline, and it can be sublimated when it is exposed to light or discoloration in the air.Appearance trait: colorless crystal. Discoloration in case of air and light. Its solution turns tan in the air.
  Contact Now
Chemical propertiesFormaldehyde and resorcinol react under alkaline conditions to form orange-red compounds, which are colorimetric at a maximum absorption wavelength of 460nm to detect low traces of formaldehyde in textile and clothing.Since resorcinol can undergo enol and ketone form tautomerism, it can react with ammonia as follows:Ketone reaction of resorcinolUnder the action of ammonia, m-phenyltriamine is obtained by reaction in ketone, and the amine is hydrolyzed in the aqueous solution of acid to obtain resorcinol.
  Contact Now
Relate News
Medicine intermediate refers to a compound generated as an intermediate step in the process of synthetic drugs. It has high purity and activity, which can synthesize target drugs through further chemical reactions. Medicine intermediates are widely used in the pharmaceutical industry, covering multiple fields. The classification of pharmaceutical intermediates and its application areas will be introduced below.1. Carboxylic acid intermediate:The intermediate of the carboxylic acid refers to the compound of the carboxylic acid group, and the common ones are benzoic acid and propylic acid.
I. Overview of chemical and pharmaceutical intermediatesChemical pharmaceutical intermediates are a very important part of the pharmaceutical industry, referring to raw materials or semi-finished products in the pharmaceutical industry. These substances undergo a series of chemical reactions to eventually form pharmaceutical products. These chemicals usually exist in liquid or solid form and belong to various types of organic compounds such as acids, alcohols, carboxylic acids, phenols, cork and so on.
April 23, 2020. Customized in the middle of Shandong Pharmaceutical. The so -called Shandong pharmaceutical intermediate is actually some chemical raw materials or chemical products for drug synthesis process. This kind of chemical product does not require the production license of drugs. It can be produced in ordinary chemical plants. As long as it reaches some levels, it can be used for the synthesis of drugs.There are more than 2,000 raw materials and intermediates that need to be matched with chemicals each year, with more than 2.5 million tons.
Shandong is one of the important pharmaceutical production bases in the country, and the production production is relatively concentrated. The treatment of Shandong Pharmaceutical Intermediate waste is essential for protecting the environment, human health, and sustainable enterprise. This article will discuss how to properly handle waste in the production of Shandong pharmaceutical intermediates.First, reasonable classification and storage wasteReasonable classification and storage waste are the first step in waste treatment.
May 13, 2020. Pharmaceutical intermediate body fluorine customized. Pharmaceutical fluorine: colorless liquid. The melting point -42 ℃. Boiling point 85 ° C. Refractive index (ND20) 1.4650. Relators (D420) 1.024. Insuvenate in water and mixes with ethanol, ether, acetone, and benzene. Apineine reacts through Schiemann (G. Schiemann).Ah. After the aniline was descended to -8 ° C after 31%hydrochloride, and the sodium nitrite solution was nitroded.
Intermediate production of chemical medicine is a work involving a large number of chemicals. If it is not managed and controlled correctly, it may bring serious risks and pollution to the environment. In order to reduce environmental risks in the production of chemical medicine, we need to improve and control from the following aspects.First, establish a scientific and standardized production process. The production of chemical medicine needs to go through multiple steps and reactions. Each step needs to carefully evaluate and formulate corresponding operating procedures.