ANILINE OIL-manufacture,factory,supplier from China

Anilidine, also known as aminobenzene, is an organic compound, chemical formula C6H7N, is a colorless oily liquid, heated to 370 °C decomposition, slightly soluble in water, soluble in ethanol, ether and other organic solvents.Aniline is one of the most important amines. It is mainly used in the manufacture of dyes, drugs, resins, and can also be used as rubber vulcanization accelerators. It itself can also be used as a black dye.

CAS Number:1885-29-6Molecular formula:C7H6N2Molecular weight:118.14Chinese Name:2-AminobenzonitrileEnglish Name:2-AminobenzonitrileChinese aliases:NoneEnglish aliases:2-AminobenzonitrilePrecise molecular weight/precise mass:118.14Polar molecular surface area/PSA:Oil-water partition coefficient/LogP:The LogP value refers to the logarithmic value of the partition coefficient of a substance in the n-octanol/water two-phase system, reflecting the distribution of the substance in the oil-water two-phase system.

Appearance: White crystalline.Melting Point: 210 °C (subl.) (lit.)Flash point 198 °CStorage conditionsKeep in dark place,Inert atmosphere,Room temperatureMorphological crystalline powderColor: off-white to yellowish-beigePH 2.0 (100g/l, H2O, 20°C)Water solubility is easily soluble in water.Detection Method: HPLCBRN3684904InChIKeyXGAFCCUNHIMIRV-UHFFFAOYSA-NCAS DataBase Reference7379-35-3EPA Chemical Substance Information 4-Chloropyridine hydrochloride (7379-35-3)apply4-chloropyridine hydrochloride is an important intermediate in organic synthesis, which is widely used in the preparation of new

Anilidine, additionally acknowledged as aminobenzene, is an natural compound, chemical components C6H7N, is a colorless oily liquid, heated to 370 °C decomposition, barely soluble in water, soluble in ethanol, ether and different natural solvents.Aniline is one of the most vital amines. It is in general used in the manufacture of dyes, drugs, resins, and can additionally be used as rubber vulcanization accelerators. It itself can additionally be used as a black dye.

1-(DIMETHYLAMINO)HEXADECANEArmeen DM 16DCETYLDIMETHYLAMINEDIMETHYL HEXADECYLAMINEhexadecyldimethylamineN,N-DIMETHYLCETYLAMINEN,N-DIMETHYLHEXADECYLAMINEN,N-DIMETHYL-N-HEXADECYLAMINEN,N-DIMETHYLPALMITYLAMINEAdma 16bairdcatb16Crodamine 3.A16DDimethyl palmitamineDimethyl-1-hexadecanamineDimethylcetylamineDimethyl-n-hexadecylaminedimethylpalmitylaminegenamin16r302dHexadecylamine, N,N-dimethyl-n,n-dimethyl-1-hexadecanaminCetyl dimethyl tertiary amine is an industrial fungicide.

Chemical propertiesFormaldehyde and resorcinol react under alkaline conditions to form orange-red compounds, which are colorimetric at a maximum absorption wavelength of 460nm to detect low traces of formaldehyde in textile and clothing.Since resorcinol can undergo enol and ketone form tautomerism, it can react with ammonia as follows:Ketone reaction of resorcinolUnder the action of ammonia, m-phenyltriamine is obtained by reaction in ketone, and the amine is hydrolyzed in the aqueous solution of acid to obtain resorcinol.

Chinese identify PiracetamForeign identify PiracetamAlso recognised as 2-oxo-1-pyrrolidine acetamideChemical formulation C6H10N2O2Molecular weight 142.156CAS 7491-74-9EINECS registration range 231-312-7Melting factor 151 to 152 °CBoiling factor 337.3 °cWater soluble and solubleDensity 1.239 g/cm³Appearance white crystalline powderFlash factor 157.8 °cSecurity Description S26; S37/39Hazard image XiHazard description R36/37/38sourceThis product is 2-oxo-1-pyrrolidinyl acetamide, calculated as dry product, t

Sodium hyaluronate, chemical system (C14H20NO11Na)n, is an inherent thing of the human body, is a glucuronic acid, no particular species, it is extensively current in placenta, amniotic fluid, lens, articular cartilage, pores and skin dermis and different tissues and organs. It is disbursed in the cytoplasm and interstitium, which lubricates and nourishes the cells contained in it and the cell organs themselves.It additionally presents a microenvironment for cellphone metabolism.

L-alanine is an natural compound with the system C3H7NO2, is a colorless to white crystalline powder, soluble in water, ethanol, insoluble in ether and acetone. It is commonly used in biochemical research, tissue culture, liver feature determination, taste enhancer, can expand the seasoning impact of condiments, and can additionally be used as a bitter style correction agent to enhance the bitter style of natural acids.Physical data1.

Magnesium sulfate solution, volumetric laxatives and choleretic agents. It is used for catharsis, choleretic, duodenal drainage and nearby swelling.Ingredients BroadcastThe fundamental thing of this product is magnesium sulfate.It is a sterilized aqueous answer of magnesium sulfate. Magnesium sulfate (MgSO4.7H2O) have to be 95.0%~105.0% of the labeled amount.Molecular formula: MgSO4·7H2OMolecular weight: 246.48Indications BroadcastVolumetric laxatives and choleretics.

1.3-Butanediol is an natural compound with a molecular formulation of C4H10O2, by and large used in the instruction of polyester resin, polyurethane resin, plasticizer, etc., and additionally used as a humidifier and softener for textiles, paper and tobacco.Chinese Name: 1,3-ButanediolChinese aliases: 1,3-Dihydroxybutane; (±)-1,3-ButanediolEnglish alias: Butanediol; butane-1,3-diol; (3S)-butane-1,3-diol; (3R)-butane-1,3-diolCAS:107-88-0EINECS:203-529-7FEMA registration number: 2842Physical and chemical indicatorsAppearance: colorless, viscous l

Sulfadiazine is an organic compound with a molecular formula of C10H10N4O2S, white or off-white crystals or powders, odorless, tasteless, and gradually darkened when exposed to light. Almost insoluble in water, soluble in boiling water (1:60), slightly soluble in ethanol and acetone, insoluble in chloroform and ether, soluble in dilute hydrochloric acid, sodium hydroxide solution or ammonia solution. Melting point 252~256 °C (simultaneous decomposition). Its sodium salt is white crystalline powder, odorless, slightly bitter taste. Gradient brownish upon light.

Pharmacology and toxicologyThis product is an amide local anesthetic. After blood absorption or intravenous administration, it has obvious excitation and inhibition biphasic effect on the central nervous system, and there can be no precursor excitement, when the blood concentration is low, analgesia and drowsiness, and the pain threshold is increased; With the increase of dose, the effect or toxicity increases, and there is an anticonvulsant effect at the concentration of subtoxic blood drugs; When the blood concentration exceeds 5 mg·mL-1, convulsions can occur.

Fields of applicationPurpose 1It is suitable for vitamin B1 deficiency, has the function of maintaining normal glucose metabolism and nerve conduction, and is also used for the adjuvant treatment of dyspepsia and neuritisPreparation method:Method 1Thiamine hydrochloride is usually obtained by condensation, hydrolysis, neutralization, oxidation, and acidification of excess acetamidine hydrochloride with α-dimethoxy β-methoxypropionitrile.Upstream and downstream product informationUpstream raw materialsEthanol, hydrogen peroxide, dimethyl sulfate, ethyl chlorosulfonate, acrylonitrile, carboxylat

Boiling Point: 143-144 °C35 mm Hg(lit.)Density: 1.568 g/mL at 25 °C(lit.)Refractive index n20/D 1.572(lit.)Flash point > 230 °FSpecific gravity 1.568Sensitivity: Moisture sensitivityBRN4989077CAS DataBase Reference: 86393-34-2use2,4-Dichloro-5-fluorobenzoyl chloride is the main raw material for the preparation of third-generation quinolones such as trifluoroperidinol, trifluoroguabutenyl, pentafluridol and synthetic broad-spectrum antibiotics such as ciprofloxacin, and can also be used for pesticides, insecticides and ovicides, as well as the identification of plastics and resins.synthesisA

apply4-chloropyridine hydrochloride is an important intermediate in organic synthesis, which is widely used in the preparation of new medicines, pesticides, dyes, etc.use4-Chloropyridine hydrochloride can be used as a pharmaceutical intermediate in the process of laboratory organic synthesis and chemical and pharmaceutical research and development, and pyridine base can be used to synthesize more than 50 drugs, including antitumor drugs, penicillin, vasodilators, nicotinate, inositol nicotinate, etc.preparationPyridine is used as the starting material, and 4-chloropyridine hydrochloride is syn

2,3,4,5-TETRAFLUORBENZOYLCHLORID2,3,4,5-TETRAFLUOROBENZOYL CHLORIDEBenzoyl chloride, 2,3,4,5-tetrafluoro- (9CI)2,3,4,5-Tetrafluorobenzoyl2,3,4,5-Tetrafluorobenzoyl chloride 98%2,3,4,5-TETRAFLUOROBEZOYL CHLORIDE2,3,4,5-Tetrafluorobenzoylchloride98%94-24-62,3,4,5-Tetrafluorobenzoic acid chlorideBoiling point 65-66 °C 10mmDensity: 1.58 g/mL at 25 °C(lit.)Refractive index n20/D 1.4787(lit.)Flash point 194 °FSpecific gravity 1.580Sensitivity: Moisture sensitivityBRN5266860InChIKeyXWCKIXLTBNGIHV-UHFFFAOYSA-NCAS DataBase Reference94695-48-4

1. Heparin was originally extracted from the liver, and is now mostly extracted from the intestinal mucosa of pigs, sheep, cattle and other animals, and can be extracted from the lungs and liver. Put the fresh intestinal mucosa into the reaction pot, add sodium chloride at 3%, and adjust the pH to 9.5 with 40% sodium hydroxide. Gradually heat up to 60-65 ° C within half an hour, continue to hold heat and stir for 2h, then heat up to 95 ° C, maintain for 10min, cool to below 50 ° C and filter.

Chinese name: 1-[[2-(4-chlorophenyl)ethyl]amino]-2-chloropropane hydrochloride Chinese synonymous with green casserin intermediate; Lorcaserin intermediate 2; Lorcaserin Impurity B; 1-[[2-(4-chlorophenyl)ethyl]amino]-2-chloropropane hydrochloride; Lorcaserin hydrochloride intermediate 2; 2-Chloro-N-(4-chlorophenethyl)propan-1-amine chloride; Lorcaserin impurity B (EP); Chlorocasein Impurity B English name 1-[[2-(4-Chlorophenyl)ethyl]amino]-2-chloropropane English synonym 1-[[2-(4-Chlorophenyl)ethyl]amino]-2-chloropropane; 1-[[2-(4-Chlorophenyl)ethyl]amino]-2-chloropropaneHydrochloride; Benzene

Heptoic,acidhexacidc-7,Hexacid, C-7n-heptanoic,heptoicacid,Hepthlic, acidEnanthic, AcidOenanthic, acidEnanthylic acidHeptylic acid1-Hexanecarboxylic acidn-Heptoic acidOenanthylic acidEnanthoic acidNSC 2192n-Heptanoic acidn-Heptylic acidProduction methods and usesmethod GC,NMRHeptanaldehyde is carbonylated from 1-hexene with syngas (CO+H2), and then oxidized by air.Heptanaldehyde is prepared by carbonylation of heptene-1 and syngas, and then heptanoic acid is obtained by air oxidation.

Quality standardsOff-white to mild yellow crystalline appearanceContent 299% (HPLC)Melting factor 216-220°C(s2C)Moisture S21.5%Ignition residue S0.2%The ethanol water dissolution take a look at (thousand products) is qualifiedUses: used in pharmaceuticals, organic reagents, dyes, can additionally be used to synthesize 5,7-dimeryl flavonoids.As a medicine, resorcinol immediately acts on the clean muscle of the gastrointestinal tract and genitourinary tract, and is a prophilic non-atropine non-sinosynergine pure clean&nbs

Heptoic,acidhexacidc-7,Hexacid, C-7n-heptanoic,heptoicacid,Hepthlic, acidEnanthic, AcidOenanthic, acidEnanthylic acidHeptylic acid1-Hexanecarboxylic acidn-Heptoic acidOenanthylic acidEnanthoic acidNSC 2192n-Heptanoic acidn-Heptylic acidProduction methods and usesmethodGC,NMRHeptanaldehyde is carbonylated from 1-hexene with syngas (CO+H2), and then oxidized by air.Heptanaldehyde is prepared by carbonylation of heptene-1 and syngas, and then heptanoic acid is obtained by air oxidation.

Sodium hyaluronate, chemical formula (C14H20NO11Na)n, is an inherent component of the human body, is a glucuronic acid, no specific species, it is widely present in placenta, amniotic fluid, lens, articular cartilage, skin dermis and other tissues and organs. It is distributed in the cytoplasm and interstitium, which lubricates and nourishes the cells contained in it and the cellular organs themselves.It also provides a microenvironment for cell metabolism.

Phentermine (Phentermine), an organic compound with a molecular formula of C10H15N, is clinically used as an anorexia (diet drug) for the short-term treatment of moderate to severe obesity, and is listed as a Class II psychotropic drug controlBasic informationChinese name: phentermineEnglish name: phentermineMolecular structure dataMolar refractive index: 48.56Molar volume (cm3/mol): 158.9Isotonic specific volume (90.2K): 387.5Surface tension (dyne/cm): 35.3Polarizability (10-24cm3): 19.25 [5]Flash point: 93.1ºCRefractive index: 1.523Vapour pressure: 0.243mmHg at 25°C CAS number: 122-09-8